EN 60065 eighth edition issued in 2014, the security requirement in this standard stipulated, sound image and similar electronic products. 60065:2014 DOW standard EN (the latest date of the standard conflict with this standard) was set to November 17, 2017. In other words, since November 17, 2017, all the products to enter the European market must be based on this new standard test for conformity certification.
This standard is based on the RTTED (1999/5/EC), LVD (2006/95/EC) and GPSD (2001/95/EC), the standard of instruction. At RTTED
And LVD within the range of audio and video products must comply with this standard, can be labeled in the product CE.
If your products must be in accordance with the evaluation criteria to reduce because of inconsistent and were asked to stop selling risk, Germany Rhine t u v can provide related consulting services. In addition, the company does not meet the statutory requirements of the product will have the risk of financial sanctions from the European authorities to take.
60065:2014 EN is designed to be designed as a power supply, a power supply device, a battery or a remote power supply system, and is used for receiving, producing, recording or reproducing audio, video and related electronic devices. This standard also applies to the device that is designed to be used in combination with the above device. This standard applies to household and similar general use, but may also be used in appropriate public places, such as schools, theaters, places of worship and work places. Professional equipment used in the above areas is also included, unless there are special provisions in the range of other standards for the professional equipment.
EN within the range of the device, if only use EN60065:2002 + A1:2006 + A11:2008 + A2:2010+
A12:2011 assessment, its compliance will be in November 17, 2017 after failure. All certificates must be updated to 60065:2014 DOW before EN date.
In this version compared with the 7th, the main changes are as follows:
New requirements for coin / button type batteries
The increase to two single battery and portable package (except for the new requirements of button type)
An increase in household and weighs more than 7 kilograms of non television console warning requirements
Increased demand for LED
The compliance requirements for the distance of the distance to the distance between the 60950-1 and IEC are the same.
Related requirements for optical coupler have changed;
New requirements for wall and ceiling erection
To review all of the pro forma, in order to comply with the new directive.
|
